Navigate to...

Overview
Complete
Safetyden Building Inc. / A-13345 / 25 Oct 2019
Ventilation Checklist
Inspection score
80%
Failed items
4
Created actions
2
Site
Safetyden Building Inc.
Ventilation number
A-13345
Date and Time of Inspection

25th Oct, 2019

1:30 PM +08

Inspector (Full Name)
John Arcilie
Location
5000 Estate Enighed, Independence, KS 67301, USA
Failed items
4
Inspection / Visual Inspections
Have all background ventilators been left in the open position?
No
Notes
There is a closed vent exhaust at bay 2
Photos
Inspection / Visual Inspections
Has all protection/packaging been removed such that the system is fully functional?
No
Notes
Magnetic exhaust vent cover for bay 3 is not installed properly
Photos
Actions
To do
Hi James, can you check and fix this ventilation cover
Inspection / Visual Inspections
Upon initial start-up, was any abnormal sound or vibration experienced, or unusual smells detected?
Yes
Notes
Abnormal sound was detected upon start up
Actions
To do
Hi Chris, Please check.
Inspection / Airflow measurement test
Are all equipment in good working condition?
No
Notes
Disturbing sound was detected upon start-up of ventilation system
Actions
2
Inspection
4
2
80%
General
100%
Has the system been installed in accordance with manufacturer’s requirements?
Yes
Have relevant system installation clauses been followed?
Yes
Type of ductwork installed (e.g. rigid, semi-rigid)
Rigid
Description of installed controls (e.g. timer, central control, humidistat, PIR, etc)
Timers, Sensors, and on-off switches.
Location of manual/override controls
Near Bay 7
Visual Inspections
3
2
80%
Total installed equivalent area of background ventilators in dwelling?
5m3 /(h.m2 )
Total floor area of dwelling?
30,000 mm2
Does the total installed equivalent ventilator area meet the requirements?
Yes
Have all background ventilators been left in the open position?
No
Notes
There is a closed vent exhaust at bay 2
Photos
Have the correct number and location of extract fans/terminals been installed that satisfy ADF?
Yes
Is the installation complete with no obvious defects present?
Yes
Do all internal doors have sufficient undercuts to allow air transfer between rooms (i.e. 10 mm over and above final floor finish)?
Yes
Has all protection/packaging been removed such that the system is fully functional?
No
Notes
Magnetic exhaust vent cover for bay 3 is not installed properly
Photos
Actions
To do
Hi James, can you check and fix this ventilation cover
For ducted systems, has the ductwork installation been installed in such a manner that air resistance and leakage are kept to a minimum?
Yes
Are the correct number and size of background ventilators provided that satisfy ADF?
Yes
Has the entire system been installed such that there is sufficient access for routine maintenance and repair/replacement of components?
Yes
Have appropriate air terminal devices been installed to allow system balance?
Yes
Has the heat recovery unit and all ductwork been effectively insulated where installed in unheated spaces?
Yes
Condensate connection is complete and drains to an appropriate location?
Yes
Upon initial start-up, was any abnormal sound or vibration experienced, or unusual smells detected?
Yes
Notes
Abnormal sound was detected upon start up
Actions
To do
Hi Chris, Please check.
Does the installation follow the design?
Yes
Have any variations from the design been agreed?
Yes
Airflow measurement test
1
66.67%
Have controls been set-up in accordance with the manufacturer’s recommendations?
Yes
Have all distribution grilles been locked to prevent unauthorized adjustment?
Yes
Are all equipment in good working condition?
No
Notes
Disturbing sound was detected upon start-up of ventilation system
Completion
Recommendation
- Keep vent open at bay 2 - Check installation of vent covers at bay 3 - Fix the disturbing sound detected upon start up of ventilation systems
Inspector (Full Name and Signature)
John Arcilie
25th Oct, 2019 1:19 PM +08
Photos