Navigate to...

Overview
Complete
First Article Inspection (FAI) Report
Retaining Ring Production / 08 Apr 2019 / Jean Rojas
Inspection score
92.86%
Failed items
1
Created actions
1
Site
Sydney
General Information
Manufacturing Process
Retaining Ring Production
Manufacturer
Laundry Machinery Inc.
Location
4649 Fidler Drive, San Antonio, TX 78221
Quality Inspector
Jean Rojas
Conducted on

8th Apr, 2019

10:25 AM PST

Failed items
1
Inspection / Design Characteristics / Design Characteristics 3
Is the characteristic non-conforming?
Yes
Notes
Burrs and sharp edges still present
Photos
Actions
Done
Remove burrs and sharp edges
Actions
1
Inspection
1
1
92.86%
First Article Inspection
100%
Type of First Article
Assembly
Notes
Retaining Ring Assembly
First Article Inspection / Index of Parts
First Article Inspection / Index of Parts / Index of Parts 1
Part Number
77445565
Part Name
Retaining Ring
Type of FAI
Complete
Raw Materials & Processes
Material/Process
Material/Process / Material/Process 1
Material or Process Name
Rivet Solid CS 1000
Specification Number
MS20426L
Supplier Name and Address
ABC Rivets 10 Elm St., Boston, Ma.
Material/Process / Material/Process 2
Material or Process Name
Sealant
Specification Number
MIL-PRF-2333777D
Supplier Name and Address
Sam's Sealants 43rd St. San Jose, Ca.
Special Processes
Is a special process involved?
Yes
Special Process
100%
Special Process / Special Process 1
100%
Special Process Supplier Code
LM0000
Is the Special Process Supplier approved?
Yes
Notes
Chemical Filming
Certificate of Conformance Number
PO 98765
Special Process / Special Process 2
100%
Special Process Supplier Code
LM1212
Is the Special Process Supplier approved?
Yes
Notes
Anodizing
Certificate of Conformance Number
98765
Functional Tests
Is a functional test to be performed?
No
Manufacturing Process Verification
Design Characteristics
87.5%
Design Characteristics / Design Characteristics 1
100%
Reference Location
Note 1
Characteristic Designator
Critical
Requirement
ANSI Y14.5 1982 applies and dimensions were taken after all special processes
Inspection Result
Accept
Designed Tooling
Chemical Film and Anodizing
Is the characteristic non-conforming?
No
Design Characteristics / Design Characteristics 2
100%
Reference Location
Sheet 2 Zone J5
Characteristic Designator
Key
Requirement
IAW 79P070000 marked in the designated area
Inspection Result
Accept
Designed Tooling
Visual Inspection
Is the characteristic non-conforming?
No
Photos
Design Characteristics / Design Characteristics 3
1
1
50%
Reference Location
Note 3
Characteristic Designator
N/A
Requirement
Removed burrs and sharp edges
Inspection Result
Reject
Designed Tooling
Visual Inspection
Is the characteristic non-conforming?
Yes
Notes
Burrs and sharp edges still present
Photos
Actions
Done
Remove burrs and sharp edges
Non-conformance Number
NC6984
Design Characteristics / Design Characteristics 4
100%
Reference Location
Sheet 2 Zone G9
Characteristic Designator
Key
Requirement
All machined surfaces exhibit 125.03
Inspection Result
Surface Finish 32
Designed Tooling
Profilometer
Is the characteristic non-conforming?
No
Completion
Additional Comments
Perform Delta FAI for retaining ring assembly after maintenance of automated deburring and edge rounding machine
The signature indicates that all characteristics are accounted for; meet drawing requirements or are properly documented for disposition.
Quality Inspector
Jean Rojas
8th Apr, 2019 11:33 AM PST
Production Manager
Isabel Quinlan
8th Apr, 2019 11:33 AM PST
Media summary
8 Media files