Navigate to...

Overview
Complete
Basic Diesel Generator Maintenance Checklist
Carl O'sheen Manufacturing Inc. / 16 Nov 2018 / Jown Art
Inspection score
78.95%
Failed items
4
Created actions
0
Client / Site
Carl O'sheen Manufacturing Inc.
Conducted on (Date and Time)

16th Nov, 2018

3:25 PM PST

Job Number
G-12456
Generator Reference Number
GEN-1489
Full Name of Operator/Engineer
Jown Art
Address
39-41 high streets peterport, Moffat GY1 2JT, UK
Failed items
4
Audit / Visual Inspection
Fuel filter or sediment bowl
Needs Action
Notes
Needs replacement
Photos
Audit / Visual Inspection
Coolant level and anti-freeze mixture
Needs Action
Notes
Coolant is below its normal level.
Audit / Operating Inspection
Operation of cooling thermostat or louvers
Needs Action
Notes
Needs further investigation, it's not functioning well
Audit / Other Services
Inspect of cooling system for leaks (pressure test), residue and operation. Check engine block heater.
Needs Action
Notes
Low air pressure
Audit
4
78.95%
Visual Inspection
2
75%
Overall condition/appearance of equipment (controls, leaks, loose wires)
OK
Fan belt tension and condition
OK
Fuel filter or sediment bowl
Needs Action
Notes
Needs replacement
Photos
Lubricating oil level and viscosity
OK
Coolant level and anti-freeze mixture
Needs Action
Notes
Coolant is below its normal level.
Air filter
OK
Battery electrolyte level and specific gravity and load test
OK
Battery charging rate (trickle charger).
OK
Operating Inspection
1
75%
Day tank pump and level switches if so equipped
OK
Operation of cooling thermostat or louvers
Needs Action
Notes
Needs further investigation, it's not functioning well
Battery charging
OK
Alternator and regulator
OK
Other Services
1
85.71%
Inspect of cooling system for leaks (pressure test), residue and operation. Check engine block heater.
Needs Action
Notes
Low air pressure
Inspect and clean generator brush holders and brushes
OK
Clean and inspect exciter
OK
Inspect safety shutdown devices. This includes simulated faults on low oil pressure cut-off, high water temperature cut-off, over speed cut-off and failed start.
OK
Inspect and clean engine/generator set control
OK
Run generator set (under load) to check voltage, check frequency, check instrument system and make adjustments.
OK
Clean and tighten electrical connections, clean crankcase breather, check and tighten mounting bolts and wipe unit clean
OK
Completion
Recommendations and Overall Condition Assessment
Physical condition is good but there is a need to further investigate the cooling system. Air pressure is too low.
Engineer/Operator Full Name and Signature
Jown Art
16th Nov, 2018 4:48 PM PST
Media summary
1 Media file