Navigate to...

Overview
Complete
Garment Quality Control Checklist
31 Jul 2019 / Manila / Linery International / Garmends Asia Pacific
Inspection score
90%
Failed items
2
Created actions
0
Conducted on

31st Jul, 2019

3:00 PM +08

Inspector's Name
Jonathan Tarlengco
Location
1059 San Rafael St, Mandaluyong, 1550 Metro Manila, Philippines
Report Number
2019-0086
Client
Linery International
Supplier
Garmends Asia Pacific
Failed items
2
Inspection Criteria Sheet / Style/Color Conformity / Defects / Defects 1
Broken, cracked, missing, or wrong color accessory
Critical
Notes
Small holes were found in the sampled batch
Photos
Signatures
Overall Inspection Conclusion
Fail
Batch Sample Information
You may attach image of product design here.
Photos
Product Description
Women's Blazer; made of terylene fiber, with two side pockets; available from size 12-16; grey 002, designed in California; to be made in the Philippines
Client
Linery International
Supplier
Garmends Asia Pacific
Manufacturer
Harper Textiles
PO Number
00058769034
Item No.
2003944
Order Quantity
100
Inspection Type
Pre-production inspection
Sampling standard
ANSI/ASQ Z1.4 - 2008/ MIL-STD - 105E Normal Sampling
Inspection Criteria Sheet
1
94.74%
Style/Color Conformity
83.33%
Attach image of client's product design specification sheet and compare sampled batch to the design. Attach images for proof of conformity/non-conformity.
Photos
Style/Color Conformity / Defects
83.33%
Style/Color Conformity / Defects / Defects 1
1
83.33%
Broken, cracked, missing, or wrong color accessory
Critical
Notes
Small holes were found in the sampled batch
Photos
Substituted accessory style, size, or position
N/A
Distroted, pleated, twisted, broken or rusted button/stud
Minor
Incorrectly placed buttons, beads or sequins
N/A
Wrong thread color does used with button, bead or sequin
N/A
Substituted buttons, studs or beads
N/A
Measurement Check
Measurement Check / Measurement Point
Measurement Check / Measurement Point / Measurement Point 1
Measurement Point
Neck width from edge to edge (shoulder forward 1/2")
Tolerance
1/4"
Size 12
10"
Size 14
10 1/4"
Size 16
10 1/2"
Size 18
10 3/4"
Measurement Check / Measurement Point / Measurement Point 2
Measurement Point
Front neck drop from high point shoulder
Tolerance
1/4"
Size 12
4 3/8"
Size 14
4 1/2"
Size 16
4 5/8"
Size 18
4 3/4"
Measurement Check / Measurement Point / Measurement Point 3
Measurement Point
Back neck drop from high point shoulder
Tolerance
1/4"
Size 12
4 1/8"
Size 14
4 1/4"
Size 16
4 3/8"
Size 18
4 1/2"
Measurement Check / Measurement Point / Measurement Point 4
Measurement Point
Shoulder width from edge to edge each side
Tolerance
1/8"
Size 12
1 3/4"
Size 14
1 3/4"
Size 16
1 3/4"
Size 18
1 3/4"
Measurement Check / Measurement Point / Measurement Point 5
Measurement Point
Across from 5" from high point shoulder
Tolerance
1/4"
Size 12
12"
Size 14
12 3/8"
Size 16
12 3/4"
Size 18
13 1/8"
Measurement Check / Measurement Point / Measurement Point 6
Measurement Point
Front yoke width along seam
Tolerance
1/4"
Size 12
13 1/8"
Size 14
13 1/2"
Size 16
13 7/8"
Size 18
14 1/4"
Measurement Check / Measurement Point / Measurement Point 7
Measurement Point
Chest 1" below arm extend
Tolerance
1/4"
Size 12
20 1/4"
Size 14
21"
Size 16
21 3/4"
Size 18
22 1/2"
Quantity Conformity
Product Reference Number
2003944
Purchase Order Number
00058769034
Order Quantity
1000
Available Quantity [Pieces Packed]
500
Available Quantity [Packed CTN]
110
Available Quantity [Pieces Unpacked]
390
Not Finished Quantity
0
Sample Size [Packed Lot]
30
Sample Size [Unpacked Lot]
70
Marking/Label/Packaging
100%
Attach summary of client's specifications on marking/label/packaging here.
Unit/Packaging/Artwork
Pass
Photos
Polybag Printing/Label
N/A
Inner Packing
N/A
Outer Packing
N/A
On-site Tests
100%
On-site Tests / Pull Test for Accessories
100%
Apply a force of 6± 0.2kg for 10 seconds on all accessories by means of a pull gauge. Accessories must remain securely in place. If there is no pul lgauge available, evaluate by hand pull and include a note in the report.
Sample size
2 pcs
Did the item pass/fail the test?
Pass
On-site Tests / Fatigue Test for Accessories
100%
Check the fasteners (buttons, snaps, zippers, etc.) as intended for 50 cycles. Accessories must be undamaged without any loss of function following the test .
Sample Size
2 pcs
Did the item pass/fail the test?
Pass
On-site Tests / Stretch Test for Elastic Fabric and Straps
100%
Stretch elastic fabrics and straps to check the elasticity. They must have proper elasticity without elastic fibers or stitches breaking.
Sample Size
G
Did the item pass/fail the test?
Pass
On-site Tests / Buttonholes Test
100%
Button not sewn securely
N/A
Photos
Incomplete stitching or uncut buttonhole
Minor
One or more skipped stitches at buttonhole
N/A
Buttonhole incorrect size for buttons
Minor
Wrong direction of buttonhole
N/A
Buttonhole fraying around edges causing button to catch on threads need trimming
N/A
Signatures
1
0%
Final Comments/Observations
The sampled batch received a total quality grade of 94% as majority of the sampled batch met the product specifications. However, there were pieces that were found to have defects, particularly in style and colour conformity. These findings have to be corrected, thus another sample batch is requested for testing. The next testing will be 5 days from now.
Overall Inspection Conclusion
Fail
Supplier's Representative: Name and Signature
Adam Coles
1st Aug, 2019 4:47 PM +08
Manufacturer's Representative: Name and Signature
Jonathan Tarlengco
1st Aug, 2019 4:48 PM +08
Buyer's Representative: Name and Signature
Jenny Chung
1st Aug, 2019 4:48 PM +08
Media summary
6 Media files