Navigate to...

Overview
Complete
Pre-use Hoist Inspection Checklist
356487 / Manual / Jessie Milner / 2 Aug 2019
Inspection score
75%
Failed items
2
Created actions
0
Hoist#
356487
Hoist Type
Manual
Building#
A2
Custodian
Jessie Milner
Location
94 S Piedmont Ave, Port Orange, FL, 32129
Conducted on

2nd Aug, 2019

11:40 AM PST

Failed items
2
Inspection
Hoist rope or load chain: lower hook to above floor level, check visually for any broken wires, kinking, crushing, birdcaging, corrosion. Check load chain for bent, or stretched, cracked, scored, or heat damaged links.
Unsatisfactory
Notes
Broken wires on hoist lines found. Will have it replaced by maintenance crew asap.
Photos
Inspection
Hook / hook block and supporting hook (if equipped): check for excessive throat opening, bent/twisted elements, hook swivels freely, safety latch operational, and rope sheaves or chain sprockets for signs of wear or malfunction.
Unsatisfactory
Notes
Hook is damaged. Will report to maintenance for replacement. Tagged Hoist as NOT SAFE FOR USE.
Photos
Inspection
2
75%
1. Operators must perform this inspection (from floor level only) before each shift, and submit the form to the equipment custodian. 2. Equipment found unsafe must be removed from service. Report any deficiencies immediately to the custodian.
Inspection sticker: check for current annual sticker and all other required safety markings.
Satisfactory
Photos
Upper limit switch (if equipped): lower hook slightly, then raise hook slowly into switch, to check operation.
Satisfactory
All operating mechanisms: check for proper operation of all functions, hoist brake, bridge, trolley, pendant station (if equipped), hoist control chain or lever.
Satisfactory
Hoist rope or load chain: lower hook to above floor level, check visually for any broken wires, kinking, crushing, birdcaging, corrosion. Check load chain for bent, or stretched, cracked, scored, or heat damaged links.
Unsatisfactory
Notes
Broken wires on hoist lines found. Will have it replaced by maintenance crew asap.
Photos
Hook / hook block and supporting hook (if equipped): check for excessive throat opening, bent/twisted elements, hook swivels freely, safety latch operational, and rope sheaves or chain sprockets for signs of wear or malfunction.
Unsatisfactory
Notes
Hook is damaged. Will report to maintenance for replacement. Tagged Hoist as NOT SAFE FOR USE.
Photos
Spooling: check spooling of wire rope onto all sheaves and drums. Check load chain spooling onto sprockets and into chain bucket (if equipped).
Satisfactory
Electric, air, or hydraulic: check festoons, collectors, pendant controls, lights, strain relief, wiring for exposed conductors, and for any leaky hoses, tanks, or valves.
Satisfactory
Hoist support: fasteners, beams, trolley, gantry structure/wheels, and jib structure, engine hoist components. Hoists must be supported by an approved and engineered anchorage (portable hoists) or beam/gantry equal to or more than hoist capacity.
Satisfactory
Sign Off
Inspector's name and signature
Jessie Milner
2nd Aug, 2019 12:16 PM PST
Media summary
3 Media files